Rack Sentry - Model RS
The Rack Sentry attaches directly to the pallet rack upright column, eliminating the need to drill into the floor. It is constructed of a flexible EVA material and is easily installed without tools. Available in a number of sizes to fit most uprights. Additionally, there are models for low beam installations and for end racks.
Rack Sentry is ideal for intermediate rack uprights where high visibility and protection is most needed. The product is designed to absorb impact by flexing and then returning to shape, ready to work again. Rack Sentry has been tested to a limit of 3mph using a 5,000 Lb. (capacity) forklift without visible damage to the rack upright, forklift, or the product.
Rack Sentry can easily be doubled in height by adding a second product. Place anywhere collision protection is needed, not just at the floor.
Extremely easy, one person installation. Simply detach the hook-n-loop nylon strap, mount the correct-sized Rack Sentry protector and reattach the strap around the upright. The nylon straps are over-length in case of an obstruction behind the upright.
Rack Sentry Cutout protector features a cutaway section on the return arms to allow it to be placed on racking with beams located down to 5" from the floor. The location of the cutout is offset so that it can be placed either 5" or 7" from the floor, depending on which end in placed down.
Rack Sentry End of Rack offers 270 degrees of protection. Designed to install on the end of the rack and can protect both the front and the vulnerable end from collisions.
If you have questions, require different sizes or need assistance with your order contact our Sales Department. Call toll free (800) 564-0152 or email firstname.lastname@example.org
Lead Time: 10 Days
Vendor: Sentry Protection Products
Construction - Flexible EVA material. Equipped with (2) hook and loop fasteners.
Dimension (All Sizes) - 18"h x 3"d
Finish - Yellow
||Fits Upright Face 3"w. Overall width of 5.25". Opening is 3"w x 3"d.
||Fits Upright Face 3"w. Overall width of 5.25". 6" Offset cutout, 5" from one end, 7" from one end.
||Designed to cover a 3"w x 3"d rack, can be mounted to other sizes if necessary.
||Fits Upright Face 3.25"w. Overall width of 5.25". Opening is 3.25"w x 3"d.
|Fits Upright Face 3.5"w. Overall width of 6.25". Opening is 3.5"w x 3"d.
||Fits Upright Face 4"w. Overall width of 6.25". Opening is 4"w x 3"d.
||Fits Upright Face 4"w. Overall width of 6.25". 6" Offset cutout, 5" from one end, 7" from one end.
||Fits Upright Face 4.75"w. Overall width of 7.25". Opening is 4.75"w x 3"d.